Workshop Manual

0312 1596 - 0138

6/8

Fuel system

W 07-04-01

2011

z Position the center punch point (1) on the regulating

sleeve (2) (arrow) so that it is underneath the tip of

the marking pin.

Note

The center punch point is visible through the

bore for the locking screw.

z Position the tip of the marking pin (1) in the center

punch point.

z Clamp the clamping bracket (2) of the marking pin.

z Insert the injection pump centrally to the long holes.

z Press in injection pump to stop and tighten nuts.

z Tighten nuts.

07012