Workshop Manual

Fuel system
W 07-04-01
0312 1596 - 0138
3/8
© 11/2004
6
2011
z Move control linkage to mid position.
Note
Ignition off / stop magnet free.
z Turn in setting bolt (1) to stop.
© 39115 0
1
z Turn crankshaft until the cam for the respective
injection pump is standing on the cam basic
circuit (1).
© 39116 0
1
z Oil lightly and insert the roller tappet.
Note
- Note the assignment of the roller tappet.
- The guide pin (1) on the roller tappet must
engage in the groove (2).
Note
When replacing the roller tapper, the
assignment of the injection pump to the roller
tappet must be observed.
© 39117 0
2
1
07 16 07 17