Workshop Manual

0312 1596 - 0138
2/8
© 11/2004
6
Fuel system
W 07-04-01
2011
z Unscrew nuts (1), remove injection pump (2) and
compensation gaskets.
Note
- Loosen nuts evenly to avoid jamming the
injection pump.
- Put down the components in the order of
installation, note order of cylinders.
© 39111 0
1
2
z Pull out roller tappet (arrow) using a suitable tool,
e.g. outside locking pliers.
Note
- Put down the components in the order of
installation, note order of cylinders.
- Do not damage the roller tappet.
© 39112 0
z Unscrew cap (1) and remove sealing ring.
© 39114 0
1