Manualshelf

Workshop Manual

ManualsBrandsDeutz Engine ManualsOtherDeutz 0312 1936 2011 Workshop Manual- competence level 3
331332333334335336337338339340
0312 1595 - 0138
4/8
© 11/2004
6
Fuel system
W 07-04-01
2011
Determine depth dimension
z Measure depth dimension "A" from the crankcase
rest to the spring head rest of the roller tappet.
Note
The crankcase rest must be clean.
z Read and note measured value.
© 34178 1
z Read and note installation dimension "X" from the
rating plate of the respective injection pump.
Note
The installation dimension "X" serves
exclusively to calculate the compensation
gasket. Do not measure on the disassembled
injection pump.
© 34179 1
z Determine difference between installation
dimension "X" and depth dimension "A".
E
xamp
l
e:
Installation dimension "X" 60.00 mm
Depth dimension ”A” 59.35 mm
Difference 0.65 mm