Workshop Manual

0312 1595 - 0138
2/8
© 11/2004
6
Fuel system
W 07-04-01
2011
z Pull out roller tappet (arrow) using a suitable tool,
e.g. outside locking pliers.
Note
- Put down the components in the order of
installation, note order of cylinders.
- Do not damage the roller tappet.
© 34044 1
Install the injection pump
z Unscrew cap (arrow) and remove sealing ring.
© 34173 1
z Move control linkage to mid position.
Note
Ignition off / stop magnet free.
z Turn in setting bolt (1) to stop.
© 34174 1
1