Workshop Manual

Crankcase
W 07-02-06
0312 1592 - 0138
11/12
© 11/2004
6
2011
z Tighten new locking screw.
Note
The threaded bore for the locking screw must
be free from oil, corrosion and dirt and be dry.
© 39235 0
03007
Install control linkage
z Insert control linkage with spring in the guide
bushes.
Note
- Note installation position, the latch (1) must
face the oil filling nozzle (2).
- Pay attention to easy action of the control
linkage.
© 39236 0
1
2
z Press together spring and insert cylindrical pin (1) in
the bore (2).
Note
- The cylindrical pin must engage in the
recess (arrow) for the control path limit.
- Make sure that the spring touches the
cylindrical pin (3).
© 39237 0
1
2
3