Workshop Manual

Crankcase
W 07-02-06
0312 1592 - 0138
9/12
© 11/2004
6
2011
z Insert assembly pin with guide bush.
Note
The crankcase contact surface must be clean.
© 39227 0
z Mount centering on crankcase and tighten screw (1).
z Knock in the guide sleeve until the assembly pin
touches the centering (arrow).
z Remove centering with assembly pin.
© 39228 0
1
Install oil rise pipe
z Insert new oil rise pipe (1).
Note
The chamfer (arrow) must face the crankcase
in assembly.
© 39231 0
1