Workshop Manual

0312 1592 - 0138
4/12
© 11/2004
6
Crankcase
W 07-02-06
2011
z Push guide bush (1) onto assembly pin.
Note
The chamfer (arrow) must face the crankcase
in assembly.
© 39078 0
1
z Mount centering on crankcase.
Note
- The crankcase contact surface must be
clean.
- The fixing bolt (1) must engage the bore (2).
© 39079 0
1
2
z Tighten screw (1).
z Knock in the guide sleeve until the assembly pin
touches the spacer bush (arrow).
z Remove centering with assembly pin.
© 39082 0
1