Workshop Manual

0312 1586 - 0138
2/6
© 11/2004
6
Engine control
W 04-05-05
2011
z Unscrew screw (1) and remove startup disc (2).
z Unscrew setting bolts (3).
© 39246 0
3
1
2
z Press in all tappets.
z Pull out camshaft (1) carefully to the flywheel side.
© 39242 0
1
Remove tappets.
z Remove all tappets (arrow).
Note
Put down the components in the order of
installation, note order of cylinders.
z Check the tappets for visible signs of wear.
© 39247 0