Workshop Manual

Engine control

W 04-04-12

0312 1585 - 0138

13/16

2011

z The engine control times are set correctly when the

setting bolt can be turned another 0.75 to 2.25 turns

up to the stop in the crankcase.

Note

If the screw-in depth (X) deviates from the

specification, the toothed belt and the

clamping roller must be changed.

z Unscrew the setting bolts for camshaft and

crankshaft locking.

z Tighten locking screw (1) with new CU sealing ring.

03003

z Tighten locking screw (1) with new CU sealing ring.

03003