Workshop Manual

0312 1585 - 0138

12/16

Engine control

W 04-04-12

2011

Check engine control times

Lock camshaft

z Insert setting bolt (1) for the camshaft lock in the bore

and hold lightly.

z Turn the crankshaft in the direction of rotation of the

engine (clockwise) until the setting bolt engages the

bore of the camshaft.

z Screw setting bolt into the crankcase to the stop.

z Tighten center screw with the torque wrench in

engine direction of rotation with 40 Nm. Carefully

relieve pressure on the torque wrench.

Note

Do not turn the crankshaft any more.

z Turn in the setting bolt (1) to the crankshaft lock until

it is lightly touching the crankshaft.

Note

Do not turn the crankshaft when screwing in

the setting bolt.

z Make help marks (arrow) on the crankcase and

setting bolt.