Workshop Manual

Engine control

W 04-04-12

0312 1585 - 0138

9/16

2011

z Press the clamping roller against the toothed belt

and pre-tighten the screw.

04052

z Align the toothed belt so that there is an even

distance between the cover and the toothed belt

of 8to9mm.

z Tighten the draw side (1) of the toothed belt by

turning the camshaft toothed belt wheel in the

direction of the arrow (clockwise).

Note

- Turn the camshaft toothed wheel by hand,

not by the center screw.

- The crankshaft must be held against the stop

whilst setting the toothed belt.