Workshop Manual

Engine control

W 04-04-12

0312 1584 - 0138

11/16

2011

Note

- The pointer of the clamping roller must be in

line with the notch (1).

- If the marks are not in line, the toothed belt

tension must be corrected.

Correct the toothed belt tension

z Loosen screw and re-tighten.

z Turn the setting eccenter in the direction of the arrow

(counterclockwise) until the pointer of the clamping

roller is in line with the notch (1).

z Tighten screw.

04052

Check engine control times

Lock camshaft.

z Insert setting bolt (1) for the camshaft lock in the bore

and hold lightly.

z Turn the crankshaft in the direction of rotation of the

engine (clockwise) until the setting bolt engages the

bore of the camshaft.

z Turn the setting bolt into the crankcase to the stop.