Workshop Manual

Engine control

W 04-04-12

0312 1584 - 0138

9/16

2011

z Tighten the draw side (1) of the toothed belt by

turning the camshaft toothed belt wheel in the

direction of the arrow (counterclockwise).

Note

- Turn the camshaft toothed wheel by hand,

not by the center screw.

- The crankshaft must be held against the stop

whilst setting the toothed belt.

z Remove locking pin (1).

z Turn the setting eccenter in the direction of the arrow

(counterclockwise) until the pointer of the clamping

roller is in line with the notch (1).

Note

Turn the setting eccenter at the hexagon

socket.

z Tighten screw.

04052