Workshop Manual

0312 1584 - 0138

8/16

Engine control

W 04-04-12

2011

z Insert new clamping roller with the guide fork (1) of

the base plate in the guide pin (2) of the front cover.

Note

When installing a hydraulic pump, watch out

for different clamping rollers.

Width of clamping roller for:

- Camshaft drive 30 mm

- Hydraulic pump drive 35 mm

z Screw in screw (3).

z Position setting eccenter (arrow) in 6:00 h position.

z Press the clamping roller against the toothed belt

and pre-tighten the screw (1).

04052

z Align the toothed belt so that there is an even

distance between the cover and toothed belt

of 8to9mm.