Workshop Manual

0312 1581 - 0138

8/10

Crankcase

W 03-11-01

2011

z Pull in the camshaft bearing.

z Loosen assembly tool.

z Check that the lube oil bores match up.

Note

If the lube oil bores do not match up, the

camshaft bearing must be mounted again.

z Measure the installation depth of the camshaft

bearing with the depth measuring appliance from the

crankcase joint to the camshaft bearing.

Note

- Correct the installation depth of the camshaft

bearing if necessary.

- Installation depth, see schematic diagram.

z Remove the assembly tool.

z Oil tappets lightly with engine oil and insert (arrow).

Note

Note assignment.