Workshop Manual

0312 1581 - 0138

6/10

Crankcase

W 03-11-01

2011

Install inner camshaft bearing

z Mount inner camshaft bearing.

Note

- Note position of joint (1), see schematic

diagram.

- Check that the oil bores (arrows) in the

camshaft bearing and the crankcase match

up.

z Insert extraction bush (1) in the inner camshaft

bearing.

z Insert spindle and fit washer and nut.

Note

- Do not change the installation position of the

camshaft bearing.

- Counterbearing centered to bearing bore.

z Pull in camshaft bearing until the extraction socket is

almost flush with the crankcase (arrow).

z Loosen assembly tool.

z Check that the lube oil bores match up.

Note

If the lube oil bores do not match up, the

camshaft bearing must be mounted again.