Workshop Manual

0312 1581 - 0138
4/10
© 11/2004
6
Crankcase
W 03-11-01
2011
z Push in spindle, push on holder (1) and insert in
inside camshaft bearing.
Note
Make sure that the holder is evenly in contact
with the crankcase.
z Fit washer and nut.
© 39307 0
1
z Press out outer camshaft bearing.
z Dismantle assembly tool and remove camshaft
bearing.
© 39308 0
Remove inner camshaft bearing
z Insert extraction bush (1) in inner camshaft bearings.
z Insert spindle and fit washer and nut.
Note
Align counterbearing in the center of the
bearing bore (arrow).
© 39309 0
1