Workshop Manual

Crankcase

W 03-11-01

0312 1581 - 0138

3/10

2011

z Measure camshaft bearing with internal measuring

device. Insert internal measuring device in the

camshaft bearing.

z Balance the internal measuring device respectively

at the given measuring points and read off the

measured value at the reversal point of the pointer.

Note

- Measuring points, see schematic diagram.

- If the wear limit is reached, the bearing has

to be changed.

03 13 03 14

Remove camshaft bearing

z Remove all tappets (arrow).

Note

Put down the components in the order of

installation, note order of cylinders.

Remove outer camshaft bearing

z Insert extraction bush (1) in outer camshaft bearing.