Workshop Manual

Crankcase

W 03-08-03

0312 1578 - 0138

13/18

2011

Measure and set the parallelism of the roller lever.

z Place shim discs of at least 0.3 mm on the stud bolts

(1).

z Insert regulator lever shaft with roller lever (1) and

tighten nuts (2).

Note

Note the installation position of the regulator

lever shaft, the side with the long cut-out ”X”

must face the opening for the lube oil pump

and the shim disc.

05021

z Place shims underneath the contact surface of the

roller lever (1) so that the ball bearings do not touch

the muff (arrows).