Workshop Manual

Crankcase
W 03-08-03
0312 1577 - 0138
19/24
© 11/2004
6
2011
Pre-assemble the adjustment capsule
z Turn in the spring pre-tensioner (1) to the stop in the
housing (2) with max. 1 Nm.
z Turn out the spring pre-tensioner 1+0.5turns
again.
z Tighten lock nut (3).
© 33941 0
1 2 3
05006
z Turn in setting screw (2) to the stop on the pressure
capsule (1).
z Turn out the setting screw 1turn again.
z Tighten lock nut (3).
© 33942 1
1
2
3
05008
z Fit new round sealing ring (arrow) onto adjustment
capsule.
Note
Oil round sealing ring lightly.
© 39463 0