Workshop Manual

0312 1577 - 0138

16/24

Crankcase

W 03-08-03

2011

z Insert regulator lever shaft with roller lever (1) and

tighten nuts (2).

Note

Note the installation position of the regulator

lever shaft, the side with the long cut-out ”X”

must face the opening for the lube oil pump

and the shim disc.

05021

z Place shims underneath the contact surface of the

roller lever (1) so that the ball bearings do not touch

the muff (arrows)

z Insert meter in measuring bridge and position the

stylus with pre-tension on the ball bearing (1).

z Adjust meter to "0".