Workshop Manual

Crankcase
W 03-08-03
0312 1577 - 0138
15/24
© 11/2004
6
2011
z Remove deflector lever (2) and locking ring (1).
Note
- Note installation position of the deflector
lever.
- Pay attention to correct fit of the locking ring
in the groove.
© 39269 0
1
2
z Insert centrifugal force measuring mechanism (1).
Note
Do not damage the sealing lip of the shaft
sealing ring.
© 39634 0
1
Measure and set the parallelism of the roller lever.
z Place shim discs of at least 0.3 mm on the stud
bolts (1).
© 39633 0
1
1