Workshop Manual

0312 1576 - 0138

6/12

Crankcase

W 03-08-01

2011

z Coat sealing surface of the front cover with sealant

DEUTZ DW 67.

Note

The connection between the camshaft pin and

the centrifugal force regulator must be clean

and free of oil.

z Turn engine 180°.

Note

The oil tray sealing surface on the crankcase

must face up.

z Mount the front cover with shaft sealing ring and

tighten the screws.

z Align the front cover flush with the oil tray sealing

surface (arrows).

Note

- The sealing lips of the shaft sealing rings (1)

must touch the bearing journal all round.

- Do not tighten screws.

z Tighten the screws in the tightening order.

z Install the lube oil tray

Î Job card W 08-08-02.

03020