Workshop Manual

0312 1582 - 0138

2/4

Engine control

W 04-03-01

2011

z Carefully drill a hole (at least 3 mm Ø) diameter in

the crankshaft sealing ring.

Note

- Coat the drill thickly with grease so that no

drill chips fall into the crankcase.

- Do not damage the front cover and

crankshaft.

z Turn in self-tapping screw (1) with washer.

z Pull out crankshaft sealing ring with assembly lever.

z Visually inspect the running surface of the crankshaft

flange and front cover.