Workshop Manual

0312 1571 - 0138

2/4

Drive system

W 02-09-07

2011

Note

Schematic representation for measuring the

piston bolt bore at the points ”a” and ”b” in

the levels ”1” and ”2”.

z Measure piston bolt bore with internal measuring

device.

Insert the internal measuring device in the piston bolt

bush.

z Balance the internal measuring device respectively

at the given measuring points and read off the

measured value at the reversal point of the pointer.

Note

Measuring points, see schematic diagram.

02 78

Check the piston diameter

Note

Schematic representation for measuring the

piston diameter at the measuring points ”1, 2

and 3”, transverse to the piston bolt bore.