Workshop Manual

Drive system
W 02-09-03
0312 1570 - 0138
3/8
© 11/2004
6
2011
z Remove con rod bearing shells (1).
z Check components for visible signs of wear.
© 39240 0
1
1
Remove piston from con rod.
z Insert disassembly tool (1) in the piston bolt.
Caution!
Risk of injury! The spring ring jumps off.
Always use the disassembly tool.
© 39244 0
1
!
z Place suitable tool in recess (1).
z Remove spring rings (2) on both sides and press out
piston bolt (3).
Note
The tools are not inserted for a better
representation.
z Check components for visible signs of wear.
© 39248 0
1
2
3