Workshop Manual

Drive system
W 02-04-01
0312 1569 - 0138
5/10
© 11/2004
6
2011
z Insert con rod bearing shell in the appropriate con
rod bearing cover.
Note
- Note the assignment of the bearing shell.
- The twist protection (1) must engage in the
groove (2).
© 39343 0
2
1
z Check all clamping bushes are in place (arrows).
© 39344 0
z Oil all bearing surfaces on the bearing pin and
bearing shells lightly.
z Insert the crankshaft carefully in the crankcase.
Note
Do not jam the con rods when inserting the
crankshaft.
© 39339 0