Workshop Manual

0312 1568 - 0138
2/4
© 11/2004
6
Drive system
W 02-03-03
2011
Install piston bolt bush
z Mount piston bolt bush on con rod.
Note
Pay attention to matching of the oil bores (1) in
the piston bolt bush and the con rod.
© 39332 0
1
z Insert extraction socket (1) in new piston bolt bush.
z Place counterbearing (2) with the closed side on the
con rod and insert the screw (arrow).
z Fit washer and tighten nut.
© 39333 0
2
1
z Pull in piston bolt bush flush.
z Remove disassembly tool.
z Check matching of oil bores in the piston bolt bush
and con rod again.
© 39334 0