Workshop Manual

Drive system
W 02-03-01
0312 1567 - 0138
5/8
© 11/2004
6
2011
z Insert con rod bearing shell in the appropriate con
rod bearing cover.
Note
The twist protection (1) must engage in the
groove (2).
© 39326 0
2
1
z Mount the con rod bearing cover and tighten the
nuts.
Note
The numeric identification (1) on the con rod
and the con rod bearing cover must be
identical and be opposite each other in
assembly.
© 39327 0
1
z Tighten nuts.
Note
Use a twelve-edge box wrench.
© 39328 0
02020