Workshop Manual

Cylinder head

W 01-02-06

0312 1557 - 0138

3/4

2011

z Turn setting screw (2) into the toggle lever and

tighten the lock nut (1).

Check the toggle lever axis

z Measure toggle lever diameter with micrometer

gauge.

Note

If the wear limit is reached, the toggle lever

block has to be changed.

01 74

Complete the toggle lever block

z Push toggle lever (1) onto the toggle lever axle (2).

Note

- Oil the toggle lever axle (2) lightly.

- The toggle lever sliding surface (3) must face

the side with the notch (arrow).

1 2