Operation Manual
Table Of Contents
6
© 2002
Service and Maintenance 6.5 Belt Drives
Check, tension and change
belts only with the engine off.
Refit belt guard, if provided.
6.5.8 Tensioning Alternator Belt
1012 E
● Slacken off bolts 1, 2 and 4.
● Move alternator 5 in direction of arrow by
turning bolt 3 until correct belt tension is
achieved.
● Tighten bolts 1, 2 and 4.
6.5.9 Changing Alternator Belt
1012 E
● Remove fuel pump belt as described in 6.5.7.
● Slacken off bolts 1, 2 and 4.
● Adjust bolt 3 until the V-belt can be removed.
● Fit new belt.
● Adjust bolt 3 until the correct belt tension is
achieved.
● Tighten bolts 1, 2 and 4.
● Reinstall fuel pump belt and tension as
described in 6.5.6.
!
© 26 449 0
© 26 449 0
© 26 450 0