Operation Manual
Table Of Contents
6
© 2002
Service and Maintenance 6.5 Belt Drives
Check, tension and change
belts only with the engine off.
Refit belt guard, if provided.
6.5.2 Tensioning Fan /
Alternator Belts
1012
6.5.3 Changing Fan /
Alternator Belts
1012
● Slacken off bolts 1, 2 and 3.
● Press alternator 5 in direction of arrow A until
correct belt tension is achieved.
● Re-tighten bolts 1, 2 and 3.
● Slacken off bolts 1, 2 and 3.
● Press alternator in direction of arrow B.
● Remove and replace belt.
● Tension belt in accordance with 6.5.3.
● Re-tighten bolts 1, 2 and 3.
6.5.4 Tensioning Coolant /
Fuel Pump Belts
1012
● Slacken off bolts 1 and 2.
● Push fuel pump 3 in direction of arrow (A)
until correct belt tension is achieved.
● Re-tighten bolts 1 and 2.
!
© 26 449 0
© 26 449 0
© 26 450 0