Operation Manual
Table Of Contents
6
© 2002
6.1 Lubrication System Service and Maintenance
6.1.4 Cleaning/Changing Oil
filter (Cup)
● Switch off the engine.
● Loosen the lube oil filter cap 1 and unscrew
in an anticlockwise direction.
● Carefully lift the paper filter cartridge 3 out
of guide 4.
● Catch any dripping oil.
● Change the paper filter cartridge 3.
● Clean any dirt from the filter carrier rim and
the lube oil filter cover 1 and guide 4.
● Replace rubber seal 2 and apply a small
amount of grease
● Carefully insert the new paper filter
cartridge 3 in guide 4.
● Tighten lube oil filter cover 1 in the clockwise
direction (25 Nm).
● Start the engine.
● Check the oil level, see 6.1.2.
● Check the oil pressure, see 3.3.1.
● Check lube oil filter fitting for leaks.
Caution: hot oil!
Risk of scalding!
!
2
3
4
1
© 30 074 0