Wireless LED Trailer Light Magnetic Kit W/ Faulty Alarm Module User Manual Art no. 49.924/F STOP 5.
.4GHz Lithium 21700# 4500mAh x2pcs totally 2Hour 8 Hours 0-25meter (depend on environment difference) Bluetooth Working Frequency Battery Type & Qty Battery Charging time(Recommended) Estimated working Time Actual Working Range (Recommended) Please noted:Recommended charging current is 2.0Amp/DC5V ( Y-type Charging cable can be used for Battery charging only ! ) DOT 5.
Package Details Transmitter X1 Receivers X1 Charging Cable X1 Faulty Alarm Module X1 Button Operation/ Function Transmitter Reverse Light DC 12V Power Right Turn & Brake Tail Light Left Turn & Brake Ground Receivers 1 2 3 1： L:Left R:Right 2： Battery Capacity indicator 3： Switch ON/OFF as press as 4-5second Meanwhile, short time press as 1 seconds or so will indicate battery carapacity available.
Using Instruction Noted: First time using before, battery need full time charging (need 2h) Since Then , each time using before, need test battery capacity first, to ensure battery can work enough time Step 1 Ensure receiver(Lights) magneted on rearside of trailer steel Frame. Step 2 Transmitter Installation Transmitter can plug-in towbar Socket on Vehicle end Step 3 Press receiver Box’s switch “ON” rear light appearance as“Double Jump/Irregular flicked”.
IMPORTANT NOTE LED Light itself can pass DOT standard test our product system apply to Emergency-towing mainly Battery working time will be 8 hours, depend on difference driving ways & environment conditions. Maintenance 1）Regular charging time and fully charging is necessary, 2）check battery capacity indicator and check LED light each function work correct or not before using start. 3）it is necessary to make 2hour charging if not use over 3 months, all Lithium battery have similar demand.
