Product Info

EnoPuck
®
CO2 / CO2 NOISE / CO2 WALL
Product manual Page 9 of 32
© DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach Tel.:[phone]
23.11.2022 Hauptstraße 76, 32479 Hille Tel: [phone] - 0
Technical data might change [e-mail]; www.deuta-controls.dnet Fax:[phone] - 28
Damage to Property caused by Electrostatic Discharge (ESD)!
Indicates a potentially hazardous situation which, if not avoided, may result
in damage to property.
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not
result in
damage to property.
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).
2 Information on product safety
2.1 Intended use
The EnoPuck
®
CO2 / EnoPuck
®
CO2 NOISE / EnoPuck
®
CO2 WALL can be used to
measure CO
2
(Carbon Dioxide concentration), room temperature, rel. humidity,
brightness and sound pressure level. At the same time, each EnoPuck® CO2 is pre-
configured to signal the CO2 concentration by the internal RGB Leds.
The main difference between the devices is mounting and power supply:
- EnoPuck
®
CO2 / EnoPuck
®
CO2 NOISE
External power supply 12 V DC for standard power outlet, desk version
- EnoPuck
®
CO2 WALL
In-wall mounted power supply 12 V DC, with wall bracket