Product Info
Table Of Contents
- 1.1 About this manual
- 1.2 Notes about this Manual
- 1.3 Validity of this documentation
- 1.4 Symbols / Information on safety
- 2 Information on product safety
- 3 Disposal
- 4 Device description
- 5 Technical data
- 5.1 Communication / EnOcean wireless interface
- 5.2 Sensor: CO2 concentration
- 5.3 Sensor: Rel. humidity (RH)
- 5.4 Sensor: Temperature
- 5.5 Sensor: Ambient light / brightness
- 5.6 Sensor: Sound pressure level (only EnoPuck® CO2 NOISE)
- 5.7 Sensor: Motion / PIR
- 5.8 User interfaces
- 5.9 Housing / connection technology
- 5.10 Power supply
- 5.11 Environmental conditions
- 5.12 Dimensions and weight
- 5.13 Approvals
- 5.14 Standards and guidelines
- 6 Functional description in detail
- 7 Service / CO2 sensor calibration
- 8 Device labels
- 9 FCC (United States) Regulatory Statement
- 10 ISED (Canada) Regulatory Statements
- 11 Ordering information
- 12 Revision history
EnoPuck
®
CO2 / CO2 NOISE / CO2 WALL
Product manual Page 6 of 32
© DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach Tel.:+49 2202 285 57- 61
23.11.2022 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0
Technical data might change info@deuta-controls.de; www.deuta-controls.dnet Fax:+49 5734 51466 - 28
1.1 About this manual
This Manual describes the products
• EnoPuck
®
CO2 / FCC (AL-602-01-092) / Part nr. 12562
• EnoPuck
®
CO2 NOISE / FCC (AL-602-02-902) / Part nr. 12563
• EnoPuck
®
CO2 WALL / FCC (AL-602-04-902) / Part. Nr. 12564
(also referred to as "PRODUCT" in this document). These operating instructions are
part of the product.
• You may only use the product if you have fully read and understood this manual.
• Verify that this manual is always accessible for any type of work performed on or with
the product.
• Pass this manual as well as all other product-related documents to all owners of the
product.
• If you feel that this manual errors, inconsistencies, ambiguities or other issues,
contact the manufacturer prior to using the product.
This manual is protected by copyright and may only be used as provided for by the
corresponding copyright legislation. We reserve the right to modifications. The
manufacturer shall not be liable in any form whatsoever for direct or consequential
damage resulting from failure to observe these operating instructions or from failure to
comply with directives, regulations and standards and any other statutory requirements
applicable at the installation site of the product.
1.2 Notes about this Manual
Always retain this documentation!
This documentation is part of the product. Therefore, retain the
documentation during the entire service life of the product. Pass on the
documentation to any subsequent user. In addition, ensure that any
supplement to this documentation is included, if necessary.