Product Info

Table Of Contents
EnoPuck
®
CO2 / CO2 NOISE / CO2 WALL
Product manual Page 11 of 32
© DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach Tel.:+49 2202 285 57- 61
23.11.2022 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0
Technical data might change info@deuta-controls.de; www.deuta-controls.dnet Fax:+49 5734 51466 - 28
Do not use for health-saving or life-saving purposes!
In conjunction with devices which are used for health-saving or life-saving
purposes or whose operation may incur hazards to humans, animals or
property!
2.3 Qualification of personnel
2.3.1 EnoPuck
®
CO2 / EnoPuck
®
CO2 NOISE
These products are powered by an external power supply with +12 V DC. There is no
special training necessary to use them.
Replace defective or damaged devices!
Replace defective or damaged devices, i.e products or power supplies
(e.g., in the event of damaged housings or contacts).
2.3.2 EnoPuck
®
CO2 WALL
This product is powered by an in-wall mounted power supply. It hast o be connected
to line voltage. This has to be done by an authorized person only!
Do not work on devices while energized!
Indicates a high-risk, imminently hazardous situation which, if not avoided,
will result in death or serious injury.