Product Info
Table Of Contents
- 1 Validity of this documentation
- 2 Intended use
- 3 Disposal
- 4 Device description
- 5 Technical data
- 6 Functional description in detail
- Occupancy sensor with supply voltage monitor (PIR, Vibration)
- EURID
- 7 Service / changing batteries
- 8 Safety remarks
- 9 Device labels
- 10 FCC (United States) Regulatory Statement
- 11 ISED Regulatory Statement
- 12 Dimensions / drawings
- 13 Ordering information
- 14 Revision history
AL-602-03-902 EnoPuck BASIC
Product manual Page 7 of 19
© DEUTA Controls GmbH Paffrather Str. 140, 51465 Bergisch Gladbach Tel.:+49 2202 285 57- 61
06.07.2021 Hauptstraße 76, 32479 Hille Tel: +49 5734 51466 - 0
Technical data might change info@deuta-controls.de; www.deuta-controls.dnet Fax:+49 5734 51466 - 28
4.3 Observe intended use
The AL-602-03-902 EnoPuck BASIC must not be used in any relation with equipment
that supports, directly or indirectly, human health or life or with applications that can
result in danger for people, animals or real value.
4.4 Observe statutory provisions for operating frequency range.
The AL-602-03-902 EnoPuck BASIC must only be operated in compliance with the
country-specific provisions regarding operation of radio equipment.
4.5 Non-conduction mounting surface
A non-conductive mounting surface is necessary.
Ensure the AL-602-03-902 EnoPuck BASIC is mounted on a non-conductive surface.
If it is not, performance may be adversely affected.