User Guide

ManualsBrandsDETONGER ManualsOffice ElectronicsPortable Bluetooth Thermal Label Maker, Thermal Label Printer with a Roll of Label Paper for Clothing, Jewelry, Cable, Retail, Office, Compatible with Android & iOS, Blue

Table Of Contents

Printer Parts

Adjusting Plate

Top Cover Open Button

Paper Exit

OLED Display

Paper Tear-off Knife

Power Interface

Power Button/

Setting Button

USB Interface

Basic Operation

1. Power On

Press power button for 1.5s to turn the printer on.

2. Paper Roll Installation

Press the top cover open button and the top cover lift; Place the paper roll

into the paper bin. Please make sure the paper printing side face down,

insert adjusting plates into appropriate slots according to paper’s width.

(The plates are inserted on both sides of paper bin as factory default)

Pull a part of paper out then close the top cover.

3. Feed Paper

Label paper: short press feed button to feed one label to the beginning of

next label; long press feed button to feed label continuously, release the

feed button to stop at thebeginning of next label.

Continuous paper: press feed button to start feeding label, release feed

button to stop feeding.

4. Power Off

The printer will shut down automatically if no use it for a long period.

Time of automatic shutdown can be set by setting button, the default time

is 15 minutes. Press power button for 1.5s to shut down the printer.

5. Set Up Printer

Short press setting button, the printer enters setting status when the icon

appears on the top left corner of OLED display, press OK button to make

corresponding options.

6. Charge Printer

5V Output charger and power bank with USB port are the two ways to

charge printer.

7.Secondary Function

The printer can provide 5V (600mA) power for external devices via USB

port,like phone, Pad, etc.

Connect with Printer

1. Install Editing Application

2.Connect with Printer via BT

3.Various Templates

Feed Button/ OK Button

Scan QR Code to download label

editing App (Android, iOS). Or search

App name "Weida" from Google Play or App Store.

Turn on printer-turn on mobile phone BT-open label editing App, click

“NO Printer Connected”. Then you can edit your label and print it.

Tap "All Templates" you will find various templates for different

industries from "Offical". Please contact with us if you need

customized cloud catalogue.

Summary of content (2 pages)

PAGE 1
Printer Parts Basic Operation 1. Power On Press power button for 1.5s to turn the printer on. 2. Paper Roll Installation Adjusting Plate Top Cover Open Button Press the top cover open button and the top cover lift; Place the paper roll into the paper bin. Please make sure the paper printing side face down, insert adjusting plates into appropriate slots according to paper’s width. (The plates are inserted on both sides of paper bin as factory default) Pull a part of paper out then close the top cover.
PAGE 2
Specifications Safety Notices 2 inch Thermal Label Printer Please compliance with following notices during operation Display Type: OLED display Print Method: Direct thermal line Print Color: Black Print Width: 48mm Paper Size: 54(W) × dia.50 mm Resolution: 203 DPI/300 DPI (Optional) Interface: BT Battery Capacity: 1500mAh NOTE Do not disassemble the printer by yourself. Please read this manual carefully before use. WARNING Turn off the power immediately if a malfunction occurs.