Operation Manual

34
EN
Watches with date
Setting the date
1. Pull the crown out into position 1.
2. Turn the crown in a anti-clockwise direction.
*If the date is set between
9.00 pm and 4.00 am the weekday will not change again the following day.
3. Push the crown back into the normal position. The second hand begins to
move again.
Setting the time
1. Pull the crown out into position 2.
2. Turn the crown clockwise to set the current time.
3. Push the crown back into the normal position.
Hour hand
Minute hand
Normal
position
1st Position
Second hand
Date
2nd Position