Operation Manual

Showmen package
19
205Caravan - 14-09 - EN
19.2.2 Filling the cold water pipes
 Open the main stopcock (Fig. 173,1) at the pressure reducer.
 Establish the fresh water supply.
 Open the cold water tap that is furthest away from the pressure reducer until
water flows out.
 Close the water tap.
 Open all the further cold water taps in the caravan and wait until water flows
out.
 Close the water taps.
19.2.3 Putting the boiler into operation
The showmen packages 1 and 3 include a 30 l water boiler for water heating.
 Close the red drain valve (Fig. 177,4).
 Open the hot water tap that is furthest away from the pressure reducer until
water flows out.
 Close the water tap.
 Open all the further hot water taps in the caravan and wait until water flows out.
The boiler is filled.
 Close the water taps.
 Connect the caravan to the 240-V current supply of the site.
 Plug the plug of the boiler into the 240 V socket (Fig. 177,1).
 Switch the boiler on (Fig. 177,2).
The red indicator lamp (Fig. 177,3) at the boiler lights up.
 Set the thermostat (Fig. 177,2) in accordance with the manufacturer specifica-
tions.
Z Before the boiler is connected to the current supply, the water pipes and the
boiler have to be filled with water.
Fig. 177 Boiler
1
2
4
3