Operation Manual

Showmen package
19
204 Caravan - 14-09 - EN
19.2 Putting the showmen package into operation
19.2.1 Establishing the mains water connection to the caravan
 Close the inspection glass (Fig. 173,2) at the pressure reducer.
 Close the main stopcock at the pressure reducer (Fig. 173,1).
 Close all the water taps, stopcocks and drain valves.
 Check the pressure reducer setting of 2 bars (boiler version) or 3 bars (instanta-
neous water heater version) (Fig. 174,1).
 Connect fresh water to the bayonet fitting (brass piping, Fig. 175).
 Connect the waste water to the waste water connection (plastic piping,
Fig. 176).
Z In order to avoid damage to the vehicle, observe the order during connecting.
Z The pressure reducer is preset to 2 or 3 bars respectively depending on the
package and may not be adjusted.
Fig. 173 Pressure reducer (main stopcock
closed)
Fig. 174 Pressure reducer setting
2
1
Fig. 175 Fresh water connection (brass
piping)
Fig. 176 Waste water connection (plastic
piping)
Z Do not confuse the connections. Otherwise fresh water can be pressed through
the drains into the caravan.