Operation Manual

Maintenance
13
163Caravan - 14-09 - EN
13.7.2 Recessed halogen light with housing
The recessed halogen light is installed flush in a housing (Fig. 158,1).
Changing bulbs:
 Use a suitable tool (e.g. screwdriver) to remove the inner cover ring (Fig. 158,3
or Fig. 159,1) from the housing.
 Remove the cover ring with the glass (Fig. 158,2).
 Remove the halogen bulb (Fig. 159,2).
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
13.7.3 Children's bed lamp
Changing bulbs:  Press the light covering of the children's bed lamp (Fig. 160) lightly together
and remove it.
 Remove halogen bulb.
 Insert a new halogen bulb of the same type and the same size (5 W with pin
base).
 Press the light covering lightly together and put in on.
13.8
Wardrobe light with LED
The LED of the wardrobe light is supplied with power by 3 batteries of the type AA/
LR6/R6 ("Mignon").
Fig. 158 Recessed halogen light Fig. 159 Changing the halogen bulb
Fig. 160 Children's bed lamp
Z Use only batteries of the same type.