Operation Manual

Guarantee
1
13Caravan - 14-09 - EN
1.3.2 Inspection plan for chassis
We reserve the right to modify the inspection plan.
1.3.3 Gas inspection plan
Z The chassis inspection is not bound to the 6-year water ingress test, but should
nevertheless be carried out annually. Please also observe the respective instruc-
tions of the manufacturer (AL-KO).
Pos. Component Activity Interval
1 Front wheel Lubricate, check wheel
rims for damage, visual
check of the tyres, check
threaded spindle and
crank
Annually
2 Stabiliser, friction linings Check wear indication Annually
3 Accumulator Lubricate or oil the slide
and articulation points
Annually
4 Corner steadies Check Annually
5 Joints, hinges and levers on the
chassis
Lubricate Annually
6 Wheel attachment Tighten the wheel nuts,
check tyre bearings
Annually
7 Slotted nut on the wheel Check position and fit
lock mechanism##
Annually
8 Tyres and wheel rims Air pressure check (see
Section 15.7), visual
check for damage, tread
depth at least 2 mm
Annually
9 Brakes, brake lining Check and adjust if nec-
essary; lining thickness
min. 1.6 mm
Annually
10 Brake drums Visual check for wear and
rust, check spring tension
Annually
11 Outside lighting Function check Annually
12 Overrun brake Function check Annually
13 Brake cable assembly Visual check Annually
14 Chassis underbody Check bolts are firmly se-
cured
Annually
Z The gas inspection is prescribed by law and must be carried out every two years.
Pos. Component Activity Interval
1 Gas system Official gas inspection Every 2 years