Operation Manual

Living
7
69Caravan - 10-12 - EN
7.12.4 Bed in sleeper roof
Opening:  Release the safeguards (Fig. 66) by pulling them.
 Push the sleeper roof (Fig. 65,2) upwards with both hands on the handles.
 Pull the mattress (Fig. 65,1) downwards at the pulling device (Fig. 65,3) until it
engages audibly.
Closing:
 Close elastic bands in the sleeper roof so that the cloth bellows are not pinched.
 Press the mattress (Fig. 65,1) upwards.
 Pull the sleeper roof downwards at the pulling device (Fig. 65,4).
 Lightly pull the safeguards (Fig. 66,1) downwards and hook them in.
7.13 Converting seating groups for sleeping
X The maximum permitted load on the bed in the sleeper roof is 200 kg.
X Before commencing the journey, retract the sleeper roof.
X Only use the bed in the sleeper roof if the safety guards are in position.
X Never leave small children without supervision.
X But in particular with regard to small children less than 6 years of age, users
should ensure that they cannot fall out of the bed.
X Switch off the reading lamps in the sleeper roof before retracting the sleeper
roof. Fire hazard!
Z Attach the safety guard if persons are already in the sleeper roof.
Fig. 65 Bed in lifting roof Fig. 66 Lifting roof safeguard
1 2
3
4
Z When the sleeper roof is being retracted: Ensure that the safety guards and the
cloth bellows are not pinched.
Z In the event of an accident, emergency braking or on uneven road surfaces,
additional cushions with reinforced undersides can be thrown through the
vehicle and damage parts of the equipment. Before setting off, stow the additi-
onal cushions safely away or secure them with the straps provided for that pur-
pose.