Operation Manual

Living
7
68 Caravan - 10-12 - EN
7.12.2 Bunk bed, folding
Depending on the model, the vehicle is fitted with a folding bunk bed. When the
bunk bed is folded down, it can be used immediately without any additional con-
version.
The bunk beds can be folded up and secured with the retaining belt (Fig. 63,1). The
space under the bed can be used for storage.
7.12.3 Fixed bed (gas pressure spring)
A storage compartment is underneath the bed. Lift up the slatted frame from the
vehicle inside to place items in the storage compartment or to empty it.
Opening:
 Lift the mattress forwards and set it down on the panel.
 Lift slatted frame. The gas-pressure springs (Fig. 64,1) hold the slatted frame
open.
Closing:
 Press the slatted frame downwards against the resistance of the gas-pressure
springs.
 If necessary, push the mattress behind the panel.
X The maximum permitted bunk bed load is 100 kg.
X Never allow small children to remain in the bunk bed without supervision.
X But in particular with regard to small children less than 6 years of age, users
should ensure that they cannot fall out of the bunk bed.
X Use separate children's beds or travel cots suitable for children.
X When the bunk bed is folded up, secure it with the retaining belt (Fig. 63,1).
There is a risk of injury!
Fig. 63 Bunk bed, folding
Fig. 64 Fixed bed