Operation Manual

Living
7
56 Caravan - 10-12 - EN
Continuous ventilation With the catch lever, the hinged window can be placed in two positions:
z "Continuous ventilation" (Fig. 38)
z "Firmly closed" (Fig. 36).
To place the hinged window into the "continuous ventilation" position:
 Turn the catch lever (Fig. 38,3) a quarter turn towards the centre of the window.
 Lightly open the hinged window outwards.
 Turn the catch lever a quarter turn towards the window frame. The locking
catch (Fig. 38,2) has to be moved into the recess of window catch (Fig. 38,1).
During the journey, the hinged window may not be in the "continuous ventilation"
position.
If it rains, the "continuous ventilation" hinged window position could lead to splas-
hing water penetrating the living area. Therefore, close the hinged windows com-
pletely.
7.5.3 Blind and roller insect screen
The windows are fitted with a blind and a roller insect screen. The blind and roller
insect screen can be adjusted separately.
Blind The blind is located in the upper blind box.
Closing:
 Pull blind at the handle (Fig. 39,2) downwards. If the blind is to be completely
closed, it is suspended into the locking devices (Fig. 39,3) situated on both sides
of the window frame.
Opening:  If the blind is completely closed: Press the handle (Fig. 39,2) downwards and, at
the same time, tilt it slightly inward. The blind can be taken out of the locking
devices situated on both sides of the window frame.
 If the blind is in an intermediate position: Pull the handle (Fig. 39,2) slightly
downwards until the locking device releases.
 Use handle to return blind slowly to its initial position.
Z Open the blinds and roller screens before starting the journey. If the blinds and
roller screens are closed, the spring loads may be damaged through the vibra-
tions and shocks.
Z Depending on the window size the blinds and roller screens are equipped with
one or two handles.
Fig. 39 Hinged window