Operation Manual

Appliances
10
133Caravan - 10-12 - EN
Switching on and off
Switching on:
 If the refrigerator is to be operated with gas, open the regulator tap on the gas
bottle and the gas isolator tap "Refrigerator".
 Press the on-off switch and hold it down for 1 second.
 A lamp lights up green in the on-off switch.
Switching off:
 Press the on-off switch again and hold it down for 2 seconds.
 The lamp in the operating panel extinguishes.
Selecting the energy source:  Press the confirmation button and hold it down for 2 seconds.
 The symbols for gas, mains and battery operation begin to flash in the display
for the energy source.
 Use the arrow buttons to select the desired source.
 Press the confirmation button to confirm the selection.
Selecting the cooling level:
 Press the confirmation button and hold it down for 2 seconds.
 The symbols for gas, mains and battery operation begin to flash in the display
for the energy source.
 Press the confirmation button again.
 The display for the cooling level begins to flash.
 Use the arrow buttons to select the desired cooling level.
 Press the confirmation button to confirm the selection.
Switching off the anti-
condensation function:
 Press both arrow buttons simultaneously and hold down for 2 seconds.
 The display symbol for the anti-condensation function lights up and the func-
tion is deactivated.
Switching on the anti-
condensation function:
 Press both arrow buttons simultaneously and hold down for 2 seconds.
 The display symbol for the anti-condensation function extinguishes and the
function is activated.
Z Close the gas isolator tap "Refrigerator" when the refrigerator is operated elec-
trically.
Z If there is no Autark Package, the refrigerator draws power only from the starter
battery of the vehicle when operated with 12 V. During prolonged driving
breaks without 230 V power supply change over to gas operation so that the
vehicle battery does not discharge and the starting capability of the towing
vehicle is preserved.
Z The appliance has an anti-condensation function to prevent the operating field
from being clouded. The function can be switched off to save energy, for
example if the battery capacity is dwindling.
Z Further information can be obtained in the manufacturer's instruction manual.