Operation Manual

Appliances
10
131Caravan - 10-12 - EN
Gas operation
Switching on:  Open the regulator tap on the gas bottle and the gas isolator tap "Refrigerator".
 Set the energy selector switch (Fig. 136,1) to gas " ".
 Press the control knob (Fig. 136,3) down and hold it. The gas supply is open.
Ignition will take place automatically. A ticking sound can be heard until igni-
tion has been completed successfully.
 Keep the control knob (Fig. 136,3) pressed down until the flame indicator
(Fig. 136,2) becomes green and then release it. If the flame fades, then the igni-
tion device will repeat the ignition process.
 Adjust the refrigerating temperature with the control knob.
Switching off:
 Set the energy selector switch (Fig. 136,1) to " ". Refrigerator is switched off.
 Close the gas isolator tap "Refrigerator" and the regulator tap on the gas bottle.
Electrical operation
The refrigerator can be operated with the following voltages:
z 230 VAC
z 12 VDC
Switching the 230 V operation
on:
 Set the energy selector switch (Fig. 136,1) to 230 V operation " ".
 Use the control knob (Fig. 136,3) to adjust the refrigerating temperature.
Switching the 230 V operation
off:
 Set the energy selector switch to " ". Refrigerator is switched off.
Switching the 12 V operation
on:
 Set the energy selector switch (Fig. 136,1) to 12 V operation " ".
Switching the 12 V operation
off:
 Set the energy selector switch to " ". Refrigerator is switched off.
X Never let gas escape unburned due to danger of explosion.
Fig. 136 Operating controls for the
refrigerator (Thetford without
SES)
1 Energy selector switch
2 Flame indicator
3 Control knob for setting the tempera-
ture
Z Close the gas isolator tap "Refrigerator" when the refrigerator is operated elec-
trically.